
1 | Charge Indicator | This LED indicates the charge status of the battery pack(s). |
| LED | Off: Not charging |
|
| Red: Charging |
|
| Red Flashing: Battery pack problem |
|
| Green Flashing: Standby |
|
| Green: Charging complete |
2 | Power Contacts | Power is supplied to the Handheld Terminal via these contacts. |
3 | AC Adaptor Jack | This is used to supply power by connecting the AC adaptor (sold |
|
| separately). |
4 | Dual Battery | Use this port to connect multiple Dual Battery Chargers to each |
| Charger | other. |
| Connection Port |
|
5 | Connection | The connection bracket attaches here when you connect multiple |
| Bracket | Dual Battery Chargers to each other. |
| Attachment Holes |
|
Important!
ξAllowing the power contacts become wet can cause an electric shock or fire. In addition, if the contacts become soiled, contact may be impaired resulting in poor charging. For reasons of safety and maintaining charging battery pack(s) in optimum condition, clean the power contacts by wiping with a dry cloth or cotton swab after disconnecting the AC adaptor.
ξAlthough the battery may become warm during charging, this is normal and does not indicate a malfunction.
ξRepeated “Mounting and Removing” of battery pack in excess of times may cause the quality deterioration of the battery pack.
ξEach Dual Battery Charger comes with one connection bracket.
Since only one connection bracket is required when you connect two Dual Battery Chargers, you will always have one left over.
Simply keep the other connection bracket on hand as an extra, in case you ever need it.