Casio EA-200, EA200 Pin No, Channel, Operation, FFT Samples, Data string, Data string, Trigger Threshold, Data Output Selection, Data String Output Loops

α-1-1

English

Appendix A Command Tables

Command 1 - Channel Setup

*: parameter value marked with asterisk are initial defaults.			{ 1, Channel, Operation, Post-Processing, FFT Samples }
Channel		Operation		Post-Processing		FFT Samples
0	Clear all channels		–––		–––		–––
*1	Channel 1	0	Clear the selected channel.	0	None
2	Channel 2	*1	Auto-ID	*1	d/dt		–––
3	Channel 3	2	Voltage (± 10V)	2	d/dt, d2/dt2
			(for Voltage probe)
		4	Resistance	10	FFT-Real	1 to 14	Samples used
		5	Period	11	FFT-Real, Imaginary	(*6)	2n (2-16384)
		6	Frequency
		7	Temperature (Celsius)
		8	Temperature (Fahrenheit)
		9	Light
		10	Voltage (0-5V)
		11	Absolute Time
4	SONIC Channel	0	Clear the SONIC channel.	0	None
		*1	Meters	*1	d/dt
		2	Meters	2	d/dt, d2/dt2
		3	Feet				–––
		5	Period
		6	Frequency
		11	Absolute Time
5	DIG IN Port	0	Clear the digital input channel.		–––		–––
		*1	Active
6	DIG OUT Port	Data String Output Loops		Data string
		0	Clear the digital input channel.	0 to 255	Output data element value		–––
		1 to 32	Number of output data elements
		(*1)
10	Microphone	0	Clear the Microphone.	*0	None
		*1	Active	10	FFT-Real	1 to 14	Samples used
				11	FFT-Real, Imaginary	(*6)	2n (2-16384)
11	Analog Out CH 3 1pin ±3Vout	Data String Output Loops		Data Output Selection		Data string
		0	Clear the analog out or speaker.	*0	Data string	± 1.5	Output data element value
12	Speaker	1 to 65535	Number of output data elements	1	Channel 1
		(*1)
				2	Channel 2
				3	Channel 3
				10	Microphone

•Channel = 1, 2, 3 or 4, Operation = 5, 6, 11

{1, Channel, Operation, Pin No, Trigger Threshold, Trigger Edge }

Pin No		Trigger Threshold		Trigger Edge (Operation = 5, 6)
*2	1pin Vin (± 10V)	± 10	Set input voltage threshold value	*0	Rising edge to rising edge
			–10 to +10.	1	Falling edge to falling edge
				2	Rising edge to falling edge
				3	Falling edge to rising edge
10	6pin Vin-low (0-5V)	0 to 5		Trigger Edge (Operation = 11)
				*0	Rising edge
				1	Falling edge
				2	Rising and falling edge

•Record Time for Operations 5, 6, and 11 must be 2, 1, and 1 respectively.

•Trigger Source for Channels 1, 2, 3, and 4 must be 2, 3, 4, and 12 respectively.

•Clock Source must be 10.

20020701