Viewing Snapshots and Movies on a TV Screen
1.Use the AV cable that comes with the camera to connect it to the TV.
White
AV cable (bundled)
Yellow 
Red
TV
Terminal cover
Video Audio
USB/AV port
AUDIO IN jack (red)
AUDIO IN jack (white)
VIDEO IN jack (yellow) | Making sure that the 6 mark on the camera is |
| |
| aligned with the 4 mark of the AV cable connector, |
| connect the cable to the camera. |
•Make sure that you insert the cable connector into the USB/AV port until you feel it click securely into place. Failure to insert the connector fully can result in
poor communication or malfunction.
• Note that even while the connector is fully inserted, you still will be able to see the metal part of the connector as shown in the illustration.
• Make sure that the camera is turned off before plugging in or unplugging the cable. Check the user documentation that comes with the TV for information about requirements before plugging into or unplugging from the TV.
2.Turn on the TV and select its video input mode.
If the TV has more than one video input, select the one where the camera is connected.
115 | Viewing Snapshots and Movies |
|