4.Turn off the camera and then use the USB cable that comes with the camera to connect it to your computer.
USB port | USB cable | |
|
| |
| Large connector | |
|
| USB/AV port |
|
| Small connector |
Terminal |
| Making sure that the 6 mark on the camera is aligned |
cover |
| |
|
| with the 4 mark of the USB cable connector, connect |
|
| the cable to the camera. |
•The camera does not draw power over the USB cable. Check the battery level before connecting and make sure it is not too low.
•Make sure that you insert the cable connector into the USB/AV port until you feel it click securely into place. Failure to insert the connector fully can result in
poor communication or malfunction.
• Note that even while the connector is fully inserted, you still will be able to see the metal part of the connector as shown in the illustration.
•When connecting the USB cable to a USB port, make sure you align the connector correctly with the port.
•Your computer may not be able to recognize the camera if you connect via a USB hub. Always connect directly to the computer’s USB port.
5.Turn on the camera.
6.Windows 7 / Windows Vista users: Click “Start” and then “Computer”.
Windows XP users: Click “Start” and then “My Computer”.
Windows 2000 users: Doubleclick “My Computer”.
144Using the Camera with a Computer