Adjusting White Balance (White Balance)
You can adjust white balance to match the source of light available where you are shooting and avoid the blue cast that results when shooting outdoors when it is cloudy, and the green cast that results when shooting under fluorescent lighting.
1.In the REC mode, press [SET].
2.Use [8] and [2] to select the third control panel option from the top (White Balance).
3.Use [4] and [6] to select the shooting condition you want and then press [SET].
‡Auto WB Configures the camera to adjust white balance automatically
¤ Daylight For shooting outdoors on a clear day
|
|
| Overcast | For shooting outdoors on an overcast rainy day, in the | ||
| ' | |||||
| shade, etc. | |||||
|
|
|
|
|
| |
|
| Shade | For shooting on a clear day in the shade of trees or buildings | |||
| “ | |||||
|
|
|
|
|
|
|
|
|
| Day White |
| ||
| † | For shooting under white or day white fluorescent lighting | ||||
| Fluorescent | |||||
|
| |||||
|
|
|
|
|
|
|
|
| Daylight |
| |||
| – | For shooting under daylight fluorescent lighting | ||||
| Fluorescent | |||||
|
| |||||
«Tungsten For shooting under light bulb lighting
For configuring the camera manually to suit a particular light source.
1Select “· Manual WB”.
2Under the lighting conditions you plan to use when shooting, point the camera at
·Manual WB a blank white piece of paper so it fills the entire monitor screen and then press the
shutter button.
3Press [SET].
The white balance setting is retained even if you turn off the camera.
42 | Snapshot Tutorial |
|