3.Use [8], [2], [4], and [6] to select the geographic area you want and then press [SET].
4.Use [8] and [2] to select the city you want and then press [SET].
5.Press [SET].
IMPORTANT!
•Before configuring World Time settings, make sure that the Home City setting is the place where you live or normally use the camera. If it isn’t, select “Home” on the screen in step 1 and configure the Home City, date, and time settings as required (page 165).
Time Stamping Snapshots (Timestamp)
Procedure
[MENU] * Set Up Tab * Timestamp
You can configure the camera to stamp the recording date only, or date and time in the lower right corner of each snapshot.
• Once date and time information is stamped into a snapshot, it cannot be edited or deleted.
Example: July 10, 2012, 1:25 p.m.
Date | 2012/7/10 |
Date&Time | 2012/7/10 1:25pm |
Off | No stamping of date and/or time |
|
|
•Even if you do not stamp the date and/or time with Timestamp, you can do so later using the DPOF function or some printing application (page 139).
•Stamping is performed in accordance with the date and time settings (page 165) and the display style settings (page 165).
164 | Other Settings (Set Up) |
|