NOTE

Take care so your fingers and the strap do not block the flash.

The desired effect may not be obtained when the subject is too far away or too close.

Flash charging time (page 199) depends on operating conditions (battery condition, ambient temperature, etc.).

Shooting with flash turned off when lighting is dim results in a slow shutter speed, which can cause image blur due to camera movement. Under such conditions, secure the camera with a tripod, etc.

With red eye reduction, the flash is fired automatically in accordance with exposure. It does not fire in areas where lighting is bright.

The presence of outdoor sunlight, fluorescent lighting, or some other light source can cause abnormal image colors.

Select ? (Flash Off) for the flash setting when shooting in areas where flash photography is prohibited.

While A, S, or M is selected for the exposure mode, the flash will not fire if > (Auto Flash) or ¥ (Red Eye Reduction) is selected as the flash mode. If you want the flash to fire, select < (Flash On) as the flash mode.

Red-eye Reduction

Using the flash to shoot at night or in a dimly lit room can cause red spots inside the eyes of people who are in the image. This is caused when the light from the flash reflects off of the retina of the eye. When red-eye reduction is selected as the flash mode, the camera fires a pre-flash to cause the irises in the eyes of any people in the image to close, which reduces the chance of red eye.

Note the following important points when using red-eye reduction.

Red-eye reduction does not work unless the people in the image are looking directly at the camera (flash).

Red-eye reduction may not work very well if the subjects are located far away from the camera.

Other Useful Flash Features

• Changing the flash intensity (page 107)

45

Snapshot Tutorial