Continuous Shutter Precautions
•You can use the Manual Mode while a continuous shutter mode (High Speed CS, Normal Speed CS, F CS) is selected. To do so, set the mode dial to “A”, “S”, or “M”.
•If there is not enough available capacity on the memory card, you may not be able to record the number of CS images indicated on the monitor screen. Make sure your memory card has sufficient remaining capacity before shooting with using continuous shutter.
•With High Speed CS and F CS, exposure and focus for the first image are applied for successive images as well.
•When using a continuous shutter mode, keep the camera still until shooting is finished.
•With High Speed CS and F CS, the flash setting automatically becomes ? (Flash Off).
•Zoom is disabled during continuous shutter operations.
•The following image sizes cannot be selected while shooting with High Speed CS: “RAW+”, “10M”, “3:2”, “16:9”. Entering the High Speed CS mode while any one of these image sizes is selected will cause the image size setting to change to “9M” automatically.
•The following image sizes cannot be selected while shooting with the F CS mode: “RAW+”, “3:2”, “16:9”. Entering the F CS mode while one of the above is selected will cause the image size setting to change to “10M”.
•The “RAW+” image size setting cannot be selected while shooting with Normal Speed CS. Entering the Normal Speed CS mode while the “RAW+” image size is selected will cause the image size setting to change to “10M”.
•With High Speed CS and F CS, the maximum number of images that can be recorded during each session is limited, regardless of how much memory card storage capacity is available.
High Speed CS | Specified maximum number of continuous shutter shots |
F CS | (Max CS shots) |
|
|
The number of images will be restricted even further or shooting may be impossible when remaining memory card capacity is less than the allowable number of images for a particular CS mode.
•The Triple
•The
58 | Snapshot Tutorial |
|