IMPORTANT!

•Recorded images are transferred over wireless LAN. Do not use the Eye-Fi card or turn off Eye-Fi card communication (page 103) when on an aircraft or in any other location where use of wireless communication is limited or prohibited.

•The Eye-Fi icon will be displayed on the monitor screen while all

three of the following conditions exist: Eye-Fi card loaded; Eye-Fi setting “On”; Status On (page 110).

•The camera’s Auto Power Off function is disabled while image data transfer is in progress.

•A confirmation message will appear on the monitor screen if you try to turn off the camera while image data transfer is in progress. Follow the instructions in the messages (page 131).

•Transfer of a large number of images can take some time to complete.

•Depending on the type of Eye-Fi card you are using and its settings, images on the Eye-Fi card may be deleted following image data transfer.

•When recording a movie to an Eye-Fi card, it can take too much time to record data, which can result in breaks in the image and/or audio.

•Proper Eye-Fi card data communication may not be possible due to camera settings, battery level, or operating conditions.

100Using the Camera with a Computer