IMPORTANT!

•Formatting a memory card that already has snapshots or other files on it, will delete its contents. Normally you do not need to format a memory card again. However, if storing to a card has slowed down or if you notice any other abnormality, re-format the card.

•Be sure to use the camera to format a memory card. Formatting a memory card on a computer and then using it in the camera can slow down data processing by the camera. In the case of an SD, SDHC, or SDXC memory card, formatting on a computer can result in non-conformity with the SD format, causing problems with compatibility, operation, etc.

•Before formatting a new Eye-Fi card to use it for the first time, copy the Eye-Fi Manager install files to your computer. Do this before formatting the card.

•Before formatting an Eye-Fi card, be sure to back up any data on it that you want to keep.

Turning Power On and Off

. To turn on the camera

[p] (PLAY)

Tab

 

[ON/OFF] (Power)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Back lamp

“f” (PLAY) / “g” (REC)

To turn on power

Press [ON/OFF] (Power).

and enter the REC

• The back lamp will light green momentarily and the lens will

mode

extend out of the camera (page 29).

To turn on power

Press [p] (PLAY).

• The back lamp will light green momentarily and an image

and enter the

currently stored in camera memory will appear on the monitor

PLAY mode

screen (page 32).

 

 

 

•Take care to ensure that nothing is restricting or coming into contact with the lens as it extends. Holding the lens with your hand so it cannot extend creates the risk of malfunction.

25

Quick Start Basics