Casio EX-Z3000 Macintosh, comes with the camera, to connect it to your, 2. Use the USB cable that, 3.Double-clickthe camera’s drive icon

.To connect the camera to your computer and save files

1.Press [ON/OFF] (Power) to turn off the camera.

2. Use the USB cable that		USB port		USB cable
comes with the camera				(included with camera)
to connect it to your
Macintosh.			Large connector
The camera will turn on
automatically and battery
charging will start (page 18).
• The camera may not turn
	on automatically in the
	case of certain computer	[USB/AV]
	models or connection	port		Small connector
	conditions. If this
	happens, press [ON/OFF]
	(Power) to turn on the
	camera.	Making sure that the 6 mark on the camera is
•	Make sure that you insert
		aligned with the 4 mark of the USB cable
	the cable connector into
		connector, connect the cable to the camera.
	the USB port until you
	feel it click securely into place. Failure to insert the connector fully can result in
	poor communication or malfunction.
•	Note that even while the connector is fully inserted, you

still will be able to see the metal part of the connector as shown in the illustration.

• When connecting the USB cable to a USB port, make sure you align the connector correctly with the port.

•Your computer may not be able to recognize the camera if you connect via a USB hub. Always connect directly to the computer’s USB port.

•The first time you connect the camera to your computer with the USB cable, an error message may appear on your computer. If this happens, disconnect and then reconnect the USB cable.

3.Double-click the camera’s drive icon.

The camera’s back lamp will light green at this time. In this mode, your Macintosh recognizes the memory card loaded in the camera (or the camera’s built-in memory if it does not have a memory card loaded) as a drive. The appearance of the drive icon depends on the Mac OS version you are using.

4.Drag the “DCIM” folder to the folder to which you want to copy it.5.After the copy operation is complete, drag the drive icon to Trash.6.Disconnect the camera from the computer.

96Using the Camera with a Computer