Creating a Dynamic Photo Image

Your digital camera comes with a number of subjects in its built-in memory (“built-in subjects”). You can use these built-in subjects to create Dynamic Photo images by inserting them into your original snapshots or movies.

Step 1: Shoot the image into which you want to insert

an built-in subject.

1.In the REC mode, compose the image and press the shutter button to shoot a standard snapshot.

You will insert the built-in subject into the snapshot you shoot here.

Step 2: Create the Dynamic Photo image.

Now simply insert a built-in subject into the snapshot or movie you shot in step 1 to create your own original Dynamic Photo image.

1.Press [p] (PLAY) or touch “f” (PLAY) to enter the PLAY mode.

2.Touch “MENU” and then “Dynamic Photo”.

•If “MENU” is not displayed on the screen, touch the tab to display it.

3.Touch “ú” or “õ” or drag left or right to select the background image, and then touch “OK”.

Select the image you want to use as the background. Here, select the image you recorded in step 1 of this

procedure.

*Only images that are able to be used as background images will appear for selection at this time.

•Only an image that satisfies the following conditions can be used as a background image.

–A snapshot or movie recorded with this camera or a snapshot transferred to this camera’s memory using Photo Transport

–A snapshot with an aspect ratio of 4:3

B

3

Creating a Dynamic Photo Image