
Item | Reset |
Display | Cleared |
Memory | Cleared |
SYMBOL | , |
EFFECT | CANCEL |
STYLE | NORMAL |
NO | |
MIRROR | OFF |
MEMO | STR? |
DENSITY | 3 |
6 mm | OFF |
|
|
Troubleshooting
• Power Supply
Nothing appears on the display. | |
Possible Causes | Action |
|
|
Low batteries | Replace batteries. |
|
|
Batteries loaded incor- | Remove batteries and reload them correctly. |
rectly |
|
|
|
AC adaptor is not con- | Make sure the AC adaptor is connected cor- |
nected correctly. | rectly. |
|
|
• Text Input
| Cannot input text. |
Possible Cause | Action |
|
|
FUNCTION key has been | Press ESC to clear FUNCTION key operation. |
pressed. |
|
|
|
Tape does not come out when PRINT is pressed.
Possible Causes | Action |
|
|
Back cover is not closed | Securely close the back cover. |
completely. |
|
|
|
No more tape left in the | Replace the tape cartridge with a new one. |
cartridge. |
|
|
|
Tape jam | Remove the tape cartridge and pull out the |
| jammed tape by hand. Cut off excess tape with |
| scissors, and carefully replace the cartridge into |
| the label printer. |
| Important! |
| Never allow the tape outlet to become blocked |
| and never touch tape as it is being fed during |
| printing. |
|
|
Tape comes out when PRINT is pressed, but nothing is printed on it.
Possible Cause | Action |
|
|
Only blank spaces were | Input the text you want to print. |
input. |
|
|
|
| |
Printing is blurred, blotched, broken, etc. | |
Possible Causes | Action |
|
|
Improper print density set- | Adjust the print density setting. |
ting |
|
|
|
Improper loading of the | Remove the tape cartridge and reload it cor- |
cartridge | rectly. |
|
|
Dirty print head or rubber | Clean the printer head and roller. |
roller |
|
|
|