
To clear a portion of text
1.Press FUNCTION and then BS (CLS).
2.Use uand ito highlight “PART” (if it isn’t already highlighted).
3.Press SET.
4.Use u, i, tand yto move the cursor to start point of the text you want to delete and press SET.
5.Use u, i, tand yto move the cursor to end point of the text you want to delete.
∙The text between the cursor and the start point is highlighted as you move the cursor.
6.Press SET to clear the highlighted text or ESC to abort without clearing anything.
Text EditingYou can set up the label printer so it either overwrites existing characters with new input, or inserts new input between existing characters. Note the following example.
Example
Existing text: ABCDEFGHI
Cursor location: E
New input: XXX
OverwriteResult: ABCDXXXHI
InsertResult: ABCDXXXEFGHI
To switch between overwrite and insert
1.Press SET UP to display the SET UP menu.
2.Highlight “INPUT” and then press SET.
3.Use uand ito highlight the setting you want (“INSERT” or “OVERWRITE”) and then press SET.
∙The CAPS indicator on the display is highlighted ( or
) when overwrite is turned on.The CAPS indicator appears normally “AB” or “ab” (unhighlighted) when insert is turned on.