LONG

This setting causes the tape to feed 21mm at the beginning and end of each printing.

About 21mm

About 21mm

MEDIUM

This setting causes the tape to feed 10mm at the beginning and end of each printing.

LEADING MARGIN

AUTO TAPE CUT (Page E-30)

leader

About 23 mm

About 10 mm

About 10 mm

Leading margin auto tape cut is not performed when TAPE LENGTH: About 31 mm or less is set for OVERALL FORMAT (See page E-27).

SHORT

This setting causes the tape to feed 3mm at the beginning and end of each printing.

LEADING MARGIN

AUTO TAPE CUT (Page E-30)

leader

MANUAL

This setting doesn’t provide any side spaces of the printed text. If you perform two consecutive print operations (without manually feeding between prints), the last character of the first print operation is followed by the first character of the second print operation, with no space provided between them. It is a good way to save tape when you print a series of tapes.

Important! After you finish printing with manual feed, be sure to always press FUNCTION and then IMAGE (CUT). This feeds the tape and then cuts it. See “Manual Tape Cut” on page E-31 for details.

T-LENGTH (TAPE LENGTH)

Select “FIXED” if you want to specify a fixed tape length. Use ito highlight [ ] below “FIXED”. Use tor yto specify the tape length in the range of 0.0 cm to 99.9 cm (0~39.3 inch). Specify “AUTO” for this option if you want the label printer to automatically adjust the length of the tape.

B-ALIGN (BLOCK ALIGN)

LEFT

EQUAL

CENTER

About 23 mm About 3 mm About 3 mm

RIGHT

Leading margin auto tape cut is not performed when TAPE LENGTH: About 24 mm or less is set for OVERALL FORMAT (See page E-27).

E-28