Label printer operation is designed to be as simple as possible, thanks to on- screen menus that you can use to select the settings you need. Each menu is described in detail in the sections that follow in this manual, but note the following general points when using them.
∙The item that is highlighted in a menu is the one that is currently selected.
Currently selected item
∙Use u and i to move the highlighting up and down and change the se- lected item.
∙Press SET to execute the highlighted item, or ESC to exit the displayed menu (and return to the previous menu or screen) without selecting anything.
∙When you press SET to execute a menu item, the label printer either moves on to the next menu, or it executes the selected function and returns to the text input screen that you started from.
Part
2
Getting
Ready
This part of the manual tells you how to load the tape cartridge, and perform other basic setups for the label printer.
Important! Be sure to read this section before attempting to use the label printer.
AC power cordNote the following important precautions about the AC power cord.
∙Use only the power cord that comes with the label printer. Using a wrong power cord can damage your label printer.
∙Be sure to turn the label printer off before you connect the power cord. Do not turn power on until the power cord is connected to the label printer and plugged into and AC outlet.
To connect the AC power cord
Connect the power cord to the label printer as illustrated nearby. Plug the other end into a standard household AC outlet.
After you finish using the label printer, turn it off and disconnect the AC power cord.
∙Be sure to grasp the plug of the AC power cord when disconnecting it. Never pull on the cord.