Direct specification of character sizes
You can specify the character size in points to any one of 14 sizes from 9pt to 119pt.
A character size change is indicated on the display by a character size mark.The following table shows the 14 character sizes that are available.
Character size (point) |
| Actual Size (mm) |
9pt | 3mm |
|
12pt | 4mm |
|
14pt | 5mm |
|
|
|
|
17pt | 6mm |
|
|
|
|
20pt | 7mm |
|
|
|
|
26pt | 9mm |
|
|
|
|
34pt | 12mm |
|
|
|
|
43pt | 15mm |
|
|
|
|
51pt | 18mm |
|
|
|
|
59pt | 21mm |
|
|
|
|
68pt | 24mm |
|
|
|
|
Character size (point) | Actual Size (mm) |
|
|
85pt30mm
102pt36mm
119pt42mm
Important! Note that the millimeter sizes shown in the above table are approximations only. The actual size may be smaller, depending on the font you are using.
The vertical character sizes you can use are automatically limited by the tape width of the tape loaded in the label printer.