Message

Possible Cause

Action

 

Page

PRINTING

∙ Tape jam during

∙ Turn off power, re-

E-8

ERROR!

printing

move the tape car-

E-9

CHECK THE

 

tridge, and clear the

 

TAPE CAR-

∙ Some foreign object

tape jam.

 

 

TRIDGE!

∙ Turn off power, re-

 

 

in the tape cutter

move the tape car-

 

 

 

tridge, and remove

 

 

∙ Some foreign object

the foreign object.

 

 

∙ Clean the rubber

E-39

 

or tape residue on

roller to remove the

 

 

the rubber roller

foreign object.

 

 

 

 

 

 

RESET THE

Memory has not been

Perform the reset op-

E-8

LABEL

initialized yet.

eration.

 

 

 

PRINTER!

 

 

 

 

 

SAME DATA

Attempt made to store

Store other data.

 

E-36

ALREADY

data when the same

 

 

 

 

EXISTS!

data already exists in

 

 

 

 

 

memory.

 

 

 

 

SEND ERROR!

∙ You did not perform

∙ Press any key be-

E-38

 

sending the data

sides ON, FUNC-

 

 

within 20 seconds af-

TION,

SHIFT

or

 

 

ter the “RECEIVE

CODE

and start

 

 

OK!” message ap-

again.

 

 

 

 

peared.

 

 

 

 

 

∙ Label printer was un-

∙ Check cable connec-

 

 

able to receive data

tions and parameter

 

 

being sent from an

settings.

 

 

 

 

external source.

 

 

 

 

 

∙ Tape cartridge type is

∙ Turn off power and

 

 

not suitable for the

replace the tape car-

 

 

type of data being

tridge. Load a single-

 

 

sent to the label

colored

tape

for

 

 

printer.

monochrome data or

 

 

 

a colored tape for

 

 

 

color image data.

 

 

 

∙ Interruption of data

∙ Try again.

 

 

 

send from the com-

 

 

 

 

 

puter

 

 

 

 

 

 

 

 

 

 

Message

Possible Cause

Action

Page

THAT NAME IS

Name being assigned

Use a different name.

E-35

ALREADY

to a barcode is already

 

 

USED!

used.

 

 

 

 

 

 

THIS IS THE

Tape cartridge is not

Turn off power and

E-8

WRONG TYPE

compatible with label

load the proper tape

 

OF TAPE

printer model.

cartridge.

 

CARTRIDGE

 

 

 

 

 

 

 

TOO MANY

Attempt to input a 16th

Delete block marks

E-25

BLOCKS!

block mark (only 15 are

you don’t need.

 

 

allowed).

 

 

TOO MANY

Too many lines for

Reduce the number of

E-13

LINES

printing with a frame.

lines or use a wider

E-21

TO FRAME!

 

tape.

 

TURN OFF

Printing operation per-

Load a tape cartridge

E-8

POWER THEN

formed while the tape

and try again.

 

LOAD A TAPE

cartridge compartment

 

 

CARTRIDGE

is empty.

 

 

E-47