
Important!
∙Make sure that printed labels do not accumulate in the area around the tape outlet. Labels piling up around the tape outlet can cause tape jams and mal- function.
Tape CuttingThere are two methods for cutting tape. The auto tape cutter cuts the tape automatically after printing is complete. You can also perform a manual operation to cut the tape.
Auto tape cutter
The auto tape cutter can be used to perform the following operations.
∙To cut the margin at the beginning of a label
∙To cut the tape after printing of each label (when AUTO CUT is ON during Multiple Copy Printing)
∙To cut the tape after printing of a label is complete
■The following table shows when auto tape cut is performed and when it is not. ×: No tape cut: Tape cut
|
|
| Multiple Copy |
|
FEED (Margin) and TAPE | Leading Margin | Printing | Final | |
| LENGTH | Tape Cut | Tape Cut After Each | Tape Cut |
|
|
| Label |
|
FEED: LONG (Large Margins) | × |
|
| |
FEED: | About 31mm or more |
|
|
|
MEDIUM |
|
|
| |
|
|
|
| |
(Medium | About 31mm or less | × | × |
|
Margins) |
| |||
FEED: | About 24mm or more |
|
|
|
SHORT |
|
|
|
|
(Small | About 24mm or less | × | × |
|
Margins) |
| |||
|
|
|
| |
FEED: MANUAL (No Feed) | × | × | × |
∙Certain feed settings can disable tape cutting. In such a case, use scissors to cut the tape.
■The following shows how printing is performed in accordance with the AUTO CUT setting for Multiple Copy Printing.
AUTO CUT: ON |
|
|
label 1 |
| label 2 |
|
|
|
|
|
|
AUTO CUT: OFF |
|
|
label 1 | label 2 |
■Auto tape cut is not performed when AUTO CUT: OFF is selected.The auto cut location is determined in accordance with the feed setting, as shown below.
FEED: LONG
label 1 |
| Cut position | label 2 |
|
| ||
About 21 mm | About 21 mm |
|
|
FEED: MEDIUM |
|
|
|
label 1 | label 2 |
| |
About 23 mm About 10 mm | About 10 mm |
|
|
FEED: SHORT |
|
|
|
label 1 | label 2 |
|
|
About 23 mm About 3 mm | About 3 mm |
|
|