Part
13
Reference
This section contains information about the label printer that you can use as reference when you need it.
Cleaning the Printer Head and RollerA dirty printer head and roller can result in poor printing quality. If you have problems with print quality, use the following procedure to clean the printer head and roller.
To clean the printer head and roller
1.Make sure the label printer is turned off.
2.Press the tape cartridge compartment cover release and open the compart- ment cover.
3.Remove the tape cartridge.
4.Use a cotton swab dipped in alcohol to clean the printer head and roller as shown in the illustration.
Roller
Printer head
5. Replace the tape cartridge and close the compartment cover.
Initial SettingsThe following are the initial settings of the label printer whenever you turn it power on or reset the unit.
Item | Power On | Reset |
|
|
|
Display | Cleared* | Cleared |
|
|
|
Memory | Retained | Cleared |
|
|
|
ab(CAPS OFF)/AB(CAPS ON) | Retained | ab |
|
|
|
*Pressing SET when the message “PRESS [SET] TO RECALL” appears on the display, recalls the text that was on the screen when you last turned off power.
Item | Power On | Reset |
|
|
|
Horz/Vert | Horizontal | Horizontal |
|
|
|
Text Alignment | Left | Left |
|
|
|
Character Pitch | 8/8 | 8/8 |
|
|
|
Block Length | Auto | Auto |
|
|
|
Mirror Printing | Normal | Normal |
|
|
|
Proportional Spacing | On | On |
|
|
|
Block Spacing | Narrow | Narrow |
|
|
|
Auto Feed | Long | Long |
|
|
|
Tape Length | Auto | Auto |
|
|
|
Default Font | Retained | |
|
|
|
Insert/Overwrite | Retained | Insert |
|
|
|
Contrast (32 levels) | Retained | Level 15 |
|
|
|
Density (5 levels) | Retained | Level 3 |
|
|
|
Sound | Retained | On |
|
|
|
Language | Retained | English |
|
|
|
Character Attributes |
|
|
Fonts | Default font | |
Character Styles | Normal | Normal |
Text Effects | None | None |
Character Sizes: |
|
|
(SIZE | Auto sizing | Auto sizing |
(LINE:FORMAT MENU) | Canceled | Canceled |
|
|
|
cm/inch | Retained | cm |
|
|
|