Playing Back Audio Data Stored on a USB Flash Drive

You can use your Digital Piano to play back audio data (WAV files*) stored on a commercially available USB flash drive.

See “USB Flash Drive” on page E-47 for more information.

*Linear PCM, 16bit, 44.1 kHz, Stereo

PREPARATION

•Prepare a USB flash drive that contains data recorded to it using the Digital Piano’s Audio Recorder. See “Recording to a USB Flash Drive (Audio Recorder)” on page E-41 for more information.

•You can also use a computer to save audio data (WAV file) to the USB Flash Drive for playback. See “Storing Standard Audio Data (WAV Files) to a USB Flash Drive” on page E-48 for more information.

•Insert the USB flash drive that contains the data you want to play back into your Digital Piano’s USB flash drive port.

1. Press the ds (AUDIO RECORDER) button.

•This will cause the button’s lamp to light.

2. While holding down the cs (FUNCTION) button, press the ds (AUDIO RECORDER) button.

•This will display the audio file selection screen.

3.Use the ct (w, q) buttons to select a song.

•The ct (q) button scrolls forward through the song file names (WAV01, WAV02, etc.) The ct (w) button scrolls backward through the song file names.

4.Press the dm (EXIT) button.

5.Press the bs (PLAY/STOP) button.

•This will start playback of the selected song.

6.To stop a song, press the bs (PLAY/STOP) button again.

•To exit the Audio Recorder, press the ds (AUDIO RECORDER) button. This will cause the lamp above the AUDIO RECORDER button to go out.

Playing Demo Songs

English

E-27