Recording Your Keyboard Play

Specifying the Punch-in Recording Location (Auto Punch-in Recording)

You can use the following procedure to specify a particular range for punch-in recording.

Start measure

End measure

Punch-in recording range

1. Enter the Song Recorder record mode.

•While holding down the cs (FUNCTION) button, press the 4 (SONG RECORDER) button. This will display the recording setup screen.

2.Use the dn (u) and do (i) buttons to display “AutoPu.IN”, and then use the ct (w, q) buttons to select the start measure.

3.Use the dn (u) and do (i) buttons to display “AutoPu.OUT”, and then use the ct (w, q) buttons to select the end measure.

•After selecting the start and end measures, press the dm (EXIT) button to exit the recording setup screen.

4.Select the track that contains the range of measures you want to re-record.

•See step 3 under “Re-recording Part of a Recorder Song (Punch-in Recording)” (page E-39).

5.Press the ct (q) button to turn on auto punch-in recording.

6.Press the bs (START/STOP) button to start playback.

•Punch in recording will start from the start measure and stop with the end measure automatically.

•Play the notes and perform the other operations you want.

■Performing Punch-in Recording for Areas Smaller than One Measure

Use the procedure below to specify a punch-in recording area that includes a part of a measure.

Example: To re-record from beat 3 of measure 2 up to beat 1 of measure 4

To re-record this section

1. Start playback of the song that contains the section you want to re-record.

2. When playback reaches the beginning of the section you want to re-record, press the bo (REPEAT) button.

3. When playback reaches the end of the section you want to re-record, press the bo (REPEAT) button again.

4. Press the bs (START/STOP) button to stop playback.

5. Enter the Song Recorder record mode and select the track that contains the section you want to re-record.

•For information about selecting a track, see step 3 under “Recording to a Specific Track (Part)” (page E-37).

6.Hold down the 4 (SONG RECORDER) button until the punch-in recording screen appears on the display.

7.Press the ct (q) button to turn on auto punch-in recording.

8.Press the bo (REPEAT) button to turn on repeat.

9.Press the bs (START/STOP) button.

This starts punch-in playback from the measure before the location (start point) you specified in step 2, above.

•Punch-in recording starts automatically when playback reaches the start point and ends automatically when it reaches the location you specified in step 3 (end point).

E-40