USB Flash Drive

5. Use the ct (w, q) buttons to select the file number (01 to 99) you want to assign to the data when it is saved to the USB flash drive.

•The file number is the final two characters of the file name* that appears on the display. By changing this within the range of 01 to 99 for each save, up to 99 files of the same data type can be stored on the USB flash drive.

*The first six characters of the file name indicate the data type as shown below. These characters are fixed and cannot be changed.

Data Type

File Name
(** = file number)

 

User rhythms

USRRHY**

 

 

User Music Preset

USRMPS**

 

 

Recorder songs

RECSNG**

 

 

Registrations

REGIST**

 

 

6. Press the dp (ENTER) button.

•The message “Please Wait” will remain on the display while the save operation is being performed. Do not perform any Digital Piano operation while this message is on the display. “Complete” appears on the display after data save is complete.

•If there is already a file with the same name on the USB flash drive, a message “Replace?” will appear asking if you want to overwrite it with the new data. Press the ct (YES) button to overwrite or the ct (NO) button to cancel the save operation.

■USB Flash Drive Data (File) Storage Locations

The above procedure stores Digital Piano data in a data folder on the USB flash drive. The data folder where the data is stored depends on the data type.

Data Type

Data Folder Name

User rhythms

RHYTHMAC

 

 

User songs

MUSICLIB

 

 

User music presets

MUSICPST

 

 

Song recorder songs

RECORDER

 

 

Registrations

REGISTMR

 

 

•The above data folders are created automatically when you format the USB flash drive on the Digital Piano (page E-49).

•Note that a file not in one of the data folders cannot be loaded, deleted, or renamed by the Digital Piano. You also will not be able to recall, delete, or play any file stored in any subfolder inside one of the data folders.

Loading Data from a USB Flash Drive to Digital Piano Memory

You can use the procedure below to load data from a USB flash drive into Digital Piano memory.

IMPORTANT!

•Make sure that the data you want to load is in one of the data folders described under the procedure in the preceding section of this manual. Note that if you put data into a music data play-only folder (such as the PLAY folder), you will not be able to load the file into Digital Piano memory.

1. Insert the USB flash drive into the Digital Piano’s USB flash drive port.

2. Select the data you want to load.

To load this

Do this:

type of data*

 

User rhythms

Select from among user rhythms 001

 

through 010 (page E-21).

 

 

User songs

Select from among user songs 001

 

through 010 (page E-25).

 

 

User Music

Select from among user Music Presets

Preset

001 through 050 (page E-29).

 

 

Recorder songs

Select from among recorder songs 1

 

through 5 (page E-35).

 

 

Registrations

Press the bn (RHYTHM) button so the

 

RHYTHM lamp next to it is lit.

 

 

*For more information about data types, see page E-47.

3. Hold down the ds (AUDIO RECORDER)

button until the “LOAD” screen appears for the data you selected.

•You can cancel the LOAD/SAVE operation any time by pressing the dm (EXIT) button.

4.Use the ct (w, q) buttons to select the file you want.

5.Press the dp (ENTER) button.

•The message “Please Wait” will remain on the display while the load operation is being performed. Do not perform any Digital Piano operation while this message is on the display. “Complete” appears on the display after data loading is complete.

•If there already is a file with the same name in the Digital Piano memory, a message (Replace?) will appear asking if you want to replace it with the new data. Press the ct (YES) button to overwrite or the ct (NO) button to cancel the load operation.

E-50