Recording Your Keyboard Play

Recording to a USB Flash Drive (Audio Recorder)

Anything played on the Digital Piano is recorded to the USB flash drive as audio data (WAV files*). If you play along on the Digital Piano as you play back data stored in song memory, the memory playback and your keyboard play are both recorded to USB flash drive.

*Linear PCM, 16bit, 44.1 kHz, Stereo

Recording Capacity

99 files (No. 01 to No. 99)

Approximately 25 minutes maximum recording per file

Recorded Data

Anything played on the Digital Piano is recorded.

Individual part recording is not supported.

Recording Data Storage

Each new recording of audio data to a USB flash drive is automatically assigned a new file name, so existing data is not overwritten.

Recording Digital Piano Play (Audio Recorder)

PREPARATION

Be sure to format the USB flash drive on the Digital Piano before using it. See “USB Flash Drive” on page E-47 for more information.

1. Insert the USB flash drive into the Digital Piano’s USB flash drive port.

2. Press the ds (AUDIO RECORDER) button twice.

This will cause the AUDIO RECORDER button lamp to flash.

3. Start playing something on the keyboard.

This will start recording to the USB flash drive. The message “A.Rec Start” will appear on the display a few seconds after recording starts.

NOTE

Do not remove the USB flash drive from the USB flash drive port while the AUDIO RECORDER button lamp is lit or flashing. Doing so will interrupt recording and may corrupt data.

4. To stop recording, press the ds (AUDIO RECORDER) button.

The AUDIO RECORDER button lamp will change from flashing to lit to let you know that audio recording is complete.

At this time, you can press the bs (PLAY/STOP) button to replay what you have just recorded. To stop playback, press the bs (PLAY/STOP) button.

To exit the Audio Recorder, press the ds (AUDIO RECORDER) button so its lamp goes out.

Recording Digital Piano Play as Data

Recorded in Song Memory Plays Back

(Audio Recorder)

1. Press the 4 (SONG RECORDER) button.

This causes the SONG RECORDER button lamp to light.

2.Press the ds (AUDIO RECORDER) button twice so its lamp is flashing.

3. Press the bs (PLAY/STOP) button.

This will start playback of the current song memory contents. Play along on the Digital Piano.

4.To stop recording, press the ds (AUDIO RECORDER) button.

The AUDIO RECORDER button lamp will change from flashing to lit to let you know that audio recording is complete.

To exit the Audio Recorder, press the ds (AUDIO RECORDER) button so its lamp goes out.

English

E-41