Recording Your Keyboard Play

4. Select the tone of the part you want to record to the track.

5. Press the bs (START/STOP) button.

This will start playback of what you recorded to the system track and start recording to the currently selected track. Play what you want to record to the current track along with the playback from the system track.

6. To stop recording, press the bs (START/ STOP) button again.

This enters the playback mode. Press the bs (START/ STOP) button again to play back the track you just recorded. Each press of bs (START/STOP) starts and stops playback.

•You can use the following procedure to turn specific tracks on (play enabled) and off (play disabled). This allows you to listen only to the track(s) you want when recording a new track.

(1)While holding down the cs (FUNCTION) button, press the 4 (SONG RECORDER) button.

This displays the song selection screen.

(2)Press the do (i) button once.

This displays the track on/off screen.

(3)Use the ct (w, q) buttons to select the track you want, and then press the dp (ENTER) button to toggle it on or off.

7.Repeat steps 2 through 6 as required to record all of the tracks you want.

Deleting Data Recorded with the Song Recorder

Performance data recorded with the Song Recorder can be deleted song-by-song. You also can delete a particular track from a song.

Deleting a Recorder Song

1. Use the 4 (SONG RECORDER) button to cycle through the Song Recorder modes until the lamp above the SONG RECORDER button is lit. This is the Song Recorder playback mode.

Lit: Playback mode

2. While holding down the cs (FUNCTION) button, press the 4 (SONG RECORDER) button.

This displays the recorder song selection screen.

3. Use the ct (w, q) buttons to select the recorder song you want to delete.

4. Hold down the 4 (SONG RECORDER) button until the message “Sure?” appears on the display.

5. Press the ct (YES) button to delete the recorder song.

•To cancel the delete operation, press the ct (NO) button.

E-38