USB Flash Drive 
Formatting a USB Flash Drive
IMPORTANT!
•Be sure to format a USB flash drive on the Digital Piano before using it for the first time.
•Before formatting a USB flash drive, make sure it does not have any valuable data stored on it.
•The format operation performed by this Digital Piano is a “quick format”. If you want to completely delete all of the data in USB flash drive, format it on your computer or some other device.
1. Insert the USB flash drive you want to format into the Digital Piano’s USB flash drive port.
2. Press the cs (FUNCTION) button.
3. Press the ds (AUDIO RECORDER) button.
4. Press the do (i) button to switch to the “MediaFormat” screen.
5. Press the dp (ENTER) button.
This will display a confirmation message “SURE?”.
•If you want to cancel the format operation, press the ct (NO) or dm (EXIT) button.
6.Press the ct (YES) button.
•The message “Please Wait” will remain on the display while the format operation is being performed. Do not perform any Digital Piano operation while this message is on the display. “Complete” appears on the display after formatting is complete.
Saving Digital Piano Data to a USB Flash Drive
Use the following procedure to save Digital Piano data to a USB flash drive.
•Song Recorder songs can be converted to standard MIDI files (SMF format 0) and saved.
•User songs (downloaded songs, etc.) cannot be saved to a USB flash drive.
1. Insert the USB flash drive into the Digital Piano’s USB flash drive port.
2. Select the data you want to save to the USB flash drive.
| To select this | Do this: |
| type of data:*1 | |
User rhythms | Select from among user rhythms 001 |
| through 010 (page |
|
|
User Music | Select from among user Music Preset |
Preset | 001 through 050 (page |
|
|
Recorder songs | Select from among recorder songs 1 |
| through 5 (page |
|
|
Registrations*2 | Press the bn (RHYTHM) button so the |
| RHYTHM lamp next to it is lit. |
|
|
*1 For more information about data types, see page
*2 All registration data (24 banks × 4 areas) is saved in a single file.
3. Hold down the ds (AUDIO RECORDER)button until the “LOAD” screen appears for the data you selected.
•You can cancel the LOAD/SAVE operation any time by pressing the dm (EXIT) button.
4.Press the do (i) button to switch to the “SAVE” screen for the data you selected.
•If you are saving a recorder song to a standard MIDI file (SMF), press the do (i) button again so “SMF” is displayed on the right side of the screen.
English