Recording Your Keyboard Play

Deleting a Particular Track

1. Perform steps 1 through 3 of the procedure under “Deleting a Recorder Song” to select the recorder song that contains the track you want to delete.

2. Press the do (i) button.

This displays the track selection screen.

3. Use the ct (w, q) buttons to select the track you want to delete.

4. Hold down the 4 (SONG RECORDER) button until the message “Sure?” appears on the display.

5. Press the ct (YES) button to delete the track.

To cancel the delete operation, press the ct (NO) button.

Re-recording Part of a

Recorder Song

(Punch-in Recording)

You can use punch-in recording to re-record a specific part of recorder song that you want to improve or correct.

Mistake

Playback

Use punch-in

recording to re-record

only this part.

1. Enter the Song Recorder record mode and select the track that contains the section you want to re-record.

See step 3 under “Recording to a Specific Track (Part)” (page E-37).

2.Hold down the 4 (SONG RECORDER) button until the punch-in recording screen appears on the display.

3. Press the bs (START/STOP) button.

This will start playback of the selected track.

4. When playback reaches the point you want to re-record, play the notes and perform the other operations you want.

This automatically starts punch-in recording, which will continue until step 5, below.

Any one of the following also will start punch-in

recording: a pedal or pitch bend wheel operation; pressing the 4 (SONG RECORDER) button;*1

changing the tone setting; changing the rhythm, or tempo setting*2

*1 Press 4 (SONG RECORDER) when you want to start punch-in recording without note input or a setting change.

*2 System track only

You can perform bp (REW), bq (FF), and br (PAUSE) button operations during punch-in playback to jump more quickly to the section you want to re-record.

5.To stop punch-in recording, press the bs

(START/STOP) button again.

Anything in the track following the point where you pressed the bs (START/STOP) button will be retained as-is.

If you want to delete all of the data in the track following the section you re-recorded with punch-in recording, press the 4 (SONG RECORDER) button in place of the bs (START/STOP) button above.

If you want to cancel punch-in recording and retain the original (unedited) track data, hold down the 4 (SONG RECORDER) button until the display exits the punch-in recording screen.

English

E-39