Casio SE-S800, SE-S400, PCR-T520 Programming further clerk functions, Set code 67 Training mode

Advanced programmings and registrations

Programming further clerk functions

This section explains how you can set further programming for clerks such as setting the register in training mode or setting commission rates given to clerks. In the training mode, the register operates normally but the results will not be stored in the memory. You can use this feature for getting to know the operations of the cash register for yourself or for newly hired clerks.

Step

1 Turn the Mode switch to PGM position and select [System Setting] then press Fkey.

2 Enter 3and press okey to set the register in the programming mode.

3 Enter 2 -digit clerk number followed by 07. The “07” is the identification code for further program of clerks. Then press o key. The example on the right is for programming to clerk number 10.

Operation

>▪▪▪▪▪>F 3o

1007o

(Clerk no.)

4 Referring the following tables, input the set code you wish to program and press okey. The example on the right is for setting a commission rate.

5 Enter the program code and press Fkey. The ex- ample on the right is for setting 8.5% to commission rate 1 and 5% to commission 2.

6 If you wish to set the same program to the next clerk number, perform the step 5 again. When you set to another clerk (not next clerk number), repeat steps 3 through 5.

5 Press okey to complete the settings.

68o

(set code)

08500500F

(program code)

o

Set code 67 (Training mode)

Description	Selection	Program code
Training mode	No = 0	B
	Yes = 1	D6
Must be “00000”		ººººº
		D5 D4 D3 D2 D1

Example 1: To set the clerk number 15 as a clerk being trained.

Press 3o1507o100000Fo

Set code 68 (Commission rates)

Description	Selection	Program code
Commission rate 1 (integer)	00 to 99	BB
		D8 D7
Commission rate 1 (decimal)	00 to 99	BB
		D6 D5
Commission rate 2 (integer)	00 to 99	BB
		D4 D3
Commission rate 2 (decimal)	00 to 99	BB
		D2 D1

E-82

SES800_INC-e.indb E-82

2013/10/01 13:05:32