MULTI-TIMBRAL Mode ON/OFF | Kawai CN33 guide

Page

59

13) MULTI-TIMBRAL MODE ON/OFF

This function allows the CN33 digital piano to receive data on more than one MIDI channel simultaneously. In this mode, the CN33 digital piano can play different musical parts with different sounds for each part.

With multi-timbral mode enabled, an external sequencer can be used to enjoy an ensemble performance playing multiple sound types (multi-timbral) on a single CN33 digital piano.

¡Multi-Timbral On (On1 and On2)

This turns on the ﬂexible 16 part multi-timbral capability. Individual MIDI channels can be turned on and off, and assigned any internal sound. The internal sound for each MIDI channel can be changed when the program change number for the desired sound is received from external MIDI device and instruments or a personal computer. The CN33 digital piano’s normal program change numbers are assigned in On1 (Please see page 49 for a list of the program change numbers), and General MIDI program change numbers are assigned in On2.

¡Multi-Timbral Off

This turns off the multi-timbral capability. Only one MIDI channel will be active and only the sound currently selected will be heard when a MIDI signal is received.

Step 1

Press and hold the TRANSPOSE and USB buttons, then press the REVERB button.

2

1

Hold down both buttons

The display will alternate between showing ‘MLt’ (Multi) and on/off status. The default is off.

Step 2

Press the S or TVALUE buttons to toggle multi-timbral on1, on2 and off.

Multi-timbral mode

OFF

ON1

ON2

When the multi-timbral mode is OFF and MIDI information is received, only the currently selected internal sound will be heard.

When the multi timbral mode is ON, the internal sound that is heard corresponds to any program change number that was received from external MIDI devices and instruments or a personal computer. This sound may be different from the internal sound that is currently selected using the SOUND SELECT buttons on the panel.

When multi-timbral mode is ON, the ON/OFF setting for each individual MIDI receive channel can also be set (See page 55).

FUNCTION

BUTTONS

7

The CN33 digital piano’s multi-timbral mode defaults to ‘OFF’ each time the power is turned on.

Image 59

Kawai CN33 manual MULTI-TIMBRAL Mode ON/OFF

Contents

Appendices Page Table of Contents Important Safety Instructions Product should be connected to Doing so may cause the product to generate noise Is handled incorrectlyProduct and other devices Declaration of Conformity ‘ Pedals ‘ Front Panel ‘ Headphones and USB Connectors Play the piano Adjust the volume level using the Master Volume slider‘ Setting UP the Piano Basic Operations Press the Concert Magic and Lesson buttons simultaneously Demo Songs Turn on Selecting a SoundPress the Electric Piano button Select other sounds Buttons will turn on Dual ModePrimary sound has changed to Studio Grand Increases the volume Press the Split button Split Mode Press the PIANO2 button three times Press the Split button to deactivate split modeLED indicator for the Split button will turn off Four Hands Mode Press the Split button again to deactivate Four Hands mode ‘ Adding Reverb Reverb and Effects ‘ Applying Effects Press the Effects button again to deactivate the effects Transpose Press the Beat button MetronomePress the Tempo button Press the Tempo button again to deactivate the metronome Press the Tempo and Beat buttons simultaneously ‘ Adjusting the Metronome VolumeVolume level of the metronome can also be adjusted Step Press the Beat button again to deactivate the metronome CN33 control panel will return to normal operation Panel LockPress the Concert Magic and USB buttons simultaneously Song number will be brieﬂy shown in the display Press the PLAY/STOP button‘ Selecting a Song ‘ Listening to the Song ‘ Performing a Song Use the Balance slider to adjust the volume balance‘ Concert Magic Part Volume Balance „ Easy Beat ‘ Concert Magic Song Arrangement Types ‘ Concert Magic Demo Modes Press and hold the Concert Magic buttonStart by tapping any key with a constant steady beat ‘ Steady Beat Current tempo will be shown in the LED display Step ‘ Concert Magic Playback Speed Press the Lesson button Selecting a BOOK/SONG ‘ Exiting the Lesson Function ‘ Adjusting the Tempo of a SongListening to and Playing a Song Press the PLAY/STOP button to play the selected song ‘ Playing Back the Recording Recording a Song PracticePress the REC button Press the PLAY/STOP button to listen to the recording If no Part is selected PART1 will be selected automatically Recording REC Button ‘ Recording a Second Part Start to play the pianoPress the PLAY/STOP button to stop recording Press the PLAY/STOP button to ﬁnish recording ‘ Playing Back Recorded Parts Separately Playing Back a Song Press and hold the REC and PLAY/STOP buttons LED indicator of the selected song will start to ﬂash StepErasing a Song Selected song will start to play After connecting a USB device, press the USB buttonUSB Play USB Load Overwriting the ﬁle USB Save Selected song will be deleted Step USB DeleteConﬁrmation message will be shown in the display USB Format Press any of the panel buttons shown below ‘ Entering a Function Mode‘ Exiting a Function Mode Lower Octave Shift can be set from 0 to Lower Octave Shift Lower Pedal ON/OFF Damper Hold ON/OFF Damper Effect Press the S or Tvalue buttons to select the desired setting D B String Resonance Touch Curve Four Hands ON/OFF Press the S or Tvalue buttons to raise or lower the pitch Tuning Brief Explanation of Temperaments Temperament ‘ KEY Signature of Temperament ‘ Midi Overview Channel number can be set from 1 to Midi ChannelPress the S or Tvalue buttons to change the channel number Transmit Program Change ON/OFF Transmit Program Change Local Control ON/OFF MULTI-TIMBRAL Mode ON/OFF Channel Mute Send Program Change Numbers Press the REC button to execute the save operation User Memory Factory Reset Appendices ‘ Connecting to Other Devices ‘ USB Midi Screw I4 x 30 x ‘ Assembly Instructions Remove the protective ﬁlm from the display ‘ Specifications 10 F7 ‘ Midi Exclusive Data Format Function Transmit Receive Remarks ‘ Midi Implementation ChartPage KPSZ-0324 OW1036E-I1001 Version