Send Program Change Numbers | Kawai CN33 instruction

Page

61

15) SEND PROGRAM CHANGE NUMBERS

This function allows the CN33 digital piano to send program change numbers beyond the 32 pre-deﬁned numbers transmitted by the SOUND SELECT buttons. Using this function, any number from 1 to 128 can be sent.

Step 1

Press and hold the TRANSPOSE and USB buttons, then press the TEMPO button.

2

1

Hold down both buttons

The display will alternate between showing ‘PG#’ (Program #) and a program change number.

Step 2

Press the S or TVALUE buttons to change the program change number.

Program change number

Step 3

Press both S and TVALUE buttons simultaneously to send the program change number.

FUNCTION

BUTTONS

7

Image 61

Kawai CN33 manual Send Program Change Numbers

Contents

Appendices Page Table of Contents Important Safety Instructions Product should be connected to Product and other devices Is handled incorrectlyDoing so may cause the product to generate noise Declaration of Conformity ‘ Pedals ‘ Front Panel ‘ Headphones and USB Connectors ‘ Setting UP the Piano Adjust the volume level using the Master Volume sliderBasic Operations Play the piano Press the Concert Magic and Lesson buttons simultaneously Demo Songs Press the Electric Piano button Selecting a SoundSelect other sounds Turn on Primary sound has changed to Studio Grand Dual ModeButtons will turn on Increases the volume Press the Split button Split Mode LED indicator for the Split button will turn off Press the Split button to deactivate split modePress the PIANO2 button three times Four Hands Mode Press the Split button again to deactivate Four Hands mode ‘ Adding Reverb Reverb and Effects ‘ Applying Effects Press the Effects button again to deactivate the effects Transpose Press the Tempo button MetronomePress the Tempo button again to deactivate the metronome Press the Beat button Volume level of the metronome can also be adjusted Step ‘ Adjusting the Metronome VolumePress the Beat button again to deactivate the metronome Press the Tempo and Beat buttons simultaneously Press the Concert Magic and USB buttons simultaneously Panel LockCN33 control panel will return to normal operation ‘ Selecting a Song Press the PLAY/STOP button‘ Listening to the Song Song number will be brieﬂy shown in the display ‘ Concert Magic Part Volume Balance Use the Balance slider to adjust the volume balance‘ Performing a Song „ Easy Beat ‘ Concert Magic Song Arrangement Types Start by tapping any key with a constant steady beat Press and hold the Concert Magic button‘ Steady Beat ‘ Concert Magic Demo Modes Current tempo will be shown in the LED display Step ‘ Concert Magic Playback Speed Press the Lesson button Selecting a BOOK/SONG Listening to and Playing a Song ‘ Adjusting the Tempo of a SongPress the PLAY/STOP button to play the selected song ‘ Exiting the Lesson Function Press the REC button Recording a Song PracticePress the PLAY/STOP button to listen to the recording ‘ Playing Back the Recording If no Part is selected PART1 will be selected automatically Recording REC Button Press the PLAY/STOP button to stop recording Start to play the piano‘ Recording a Second Part Press the PLAY/STOP button to ﬁnish recording ‘ Playing Back Recorded Parts Separately Playing Back a Song Erasing a Song LED indicator of the selected song will start to ﬂash StepPress and hold the REC and PLAY/STOP buttons USB Play After connecting a USB device, press the USB buttonSelected song will start to play USB Load Overwriting the ﬁle USB Save Conﬁrmation message will be shown in the display USB DeleteSelected song will be deleted Step USB Format ‘ Exiting a Function Mode ‘ Entering a Function ModePress any of the panel buttons shown below Lower Octave Shift can be set from 0 to Lower Octave Shift Lower Pedal ON/OFF Damper Hold ON/OFF Damper Effect Press the S or Tvalue buttons to select the desired setting D B String Resonance Touch Curve Four Hands ON/OFF Press the S or Tvalue buttons to raise or lower the pitch Tuning Brief Explanation of Temperaments Temperament ‘ KEY Signature of Temperament ‘ Midi Overview Press the S or Tvalue buttons to change the channel number Midi ChannelChannel number can be set from 1 to Transmit Program Change ON/OFF Transmit Program Change Local Control ON/OFF MULTI-TIMBRAL Mode ON/OFF Channel Mute Send Program Change Numbers Press the REC button to execute the save operation User Memory Factory Reset Appendices ‘ Connecting to Other Devices ‘ USB Midi Screw I4 x 30 x ‘ Assembly Instructions Remove the protective ﬁlm from the display ‘ Specifications 10 F7 ‘ Midi Exclusive Data Format Function Transmit Receive Remarks ‘ Midi Implementation ChartPage KPSZ-0324 OW1036E-I1001 Version