Indicates a potential hazard that could result in injury or CAUTION damage to the product or other property if the product
is handled incorrectly.
Do not use the product in the following areas.
Areas, such as those near windows, where the product is exposed to direct sunlight
Extremely hot areas, such as near a heater Extremely cold areas, such as outside Extremely humid areas
Areas where a large amount of sand or dust is present Areas where the product is exposed to excessive
vibrations
Using the product in such areas may result in product breakdown.
Use the product only in moderate climates (not in tropical climates).
When you close the keyboard cover, close it gently.
Before connecting cords, make sure that the power to this product and other devices is turned
OFF.
Do not drag the product on the floor. Take care not to drop the product.
Do not place the product near electrical appliances such as TVs and radios.
When connecting the AC power cord and other cords, take care
not to get them tangled.
Do not wipe the product with benzene or thinner.
Closing it roughly may trap your fingers, resulting in injury.
OFF | Failure to do so may cause breakdown of this |
| product and other devices. |
Please lift up the product when moving it. Please note that the product is heavy and must be carried by more than two persons. Dropping the product may result in breakdown.
Doing so may cause the product to generate noise.
If the product generates noise, move the product sufficiently away from the electrical appliance or connect it to another AC outlet.
Failure to do so may damage them, resulting in fire, electric shock or
Doing so may result in discoloration or deformation of the product.
When cleaning the product, put a soft cloth in lukewarm water, squeeze it well, then wipe the product.
Do not stand on the product or exert excessive force.
Do not place naked flame, such as lighted candles on the product.
Ensure that the ventilation is not impeded by covering the ventilation openings with items, such as newspaper,
Doing so may cause the product to become deformed or fall over, resulting in breakdown or injury.
Doing so may cause the illumination to fall over, resulting in fire.
Failure to do so may
The product should be located so that its location or position does not interfere with its proper ventilation. Ensure a minimum distance of 5cm around the product for sufficient ventilation.
