Casio TE-2400 Init 2 operation, Flag clear operation, Hold down <RECEIPT FEED, 4.Release <RECEIPT FEED, 4. Release <RECEIPT FEED, 2.Hold down <RECEIPT FEED

Flag clear operation1. Plug the power cord into an AC outlet.

2.	Hold down <RECEIPT FEED>.		JOURNAL
			FEED
		REG2	X1
		REG1	Z1
3.	Turn the mode switch to PGM position.	OFF	X2/Z2
		RF

Initialization

4. Release <RECEIPT FEED>.

You should see “FFFFFFFFFF” on the display.

If 10 Fs are not shown or another character are shown, immediately set the mode switch to OFF and restart from the beginning of this procedure.

5. Press <SUBTOTAL> to complete.

PGM

RECEIPT JOURNAL

FEED FEED

After completion of flag clear, receipt is issued.

Note: After flag clear, clerk 1 is assigned automatically. So do not program clerk 1 as not assignable or not operable in PGM mode.

Init 2 operation

1.Plug the power cord into an AC outlet.

2.Hold down <RECEIPT FEED>.

3.Turn the mode switch to PGM position.

4.Release <RECEIPT FEED>.

You should see “FFFFFFFFFF” on the display.

If 10 Fs are not shown or another character are shown, immediately set the mode switch to OFF and restart from the beginning of this procedure.

JOURNAL

FEED

REG2 X1

REG1 Z1

OFF X2/Z2

RF

PGM

RECEIPT JOURNAL

FEED FEED

5. Enter “8888888888” and press <CHECK TEND> to complete.

After completion, receipt is issued.

TE-2200/2400 Dealer's Manual 19