Casio TE-2400 Canadian tax system, Tax table programming, *1 Rounding/Tax system code, Rounding code specification, Tax system code specification

Key function/machine feature (P3)

Tax table programming

Programming procedure

PGM

Mode switch

8

3s

8

::::s

8

::^::::a

8

(for the U.S., Singapore)
Tax table 1	= 0125
{Tax table 2	= 0225
Tax table 3	= 0325	(for other area)
(for Canada)
		Tax table 1		=	0125
Tax table 1	= 0125	Tax table 2		=	0225
Tax table 2	= 0225	{	:	=	:
Tax table 3	= 0325				1025
{	= 0425	Tax table 10 =
Tax table 4

Tax rate (4-digit for integer + 4-digit for decimal)

::::a

8

Tax table maximum value (“0” means unlimited).

:D4 :D3 :D2 :D1 a

8

::::a

8

::::a

8

::::a

8

::::a

8

s

Rounding/tax table system code *1

Sum of a cyclic pattern

Number of values in each cyclic pattern

Sum of values in each non-cyclic pattern

Actual value of difference of the non-cyclic and cyclic values You must enter these values in 4-digit block. If the last block comes out to be only two digits, add two zeros.

Loop to input the next block.

Tax system code specification

*1 Rounding/Tax system code				D2	D1	Rounding
Rounding code specification				4	--	Singapore rounding
				--	1	Tax table only
	D4	D3	Rounding
--				2	U.S. tax table with tax rate or add-on tax only
		5	0			Rounding off two decimal places
				--	3	Add-in tax rate
	9	0	Rounding up to two decimal places
				--	4	Tax-on-tax (Canada, Singapore)
	0	0	Cut off two decimal places
				--	6	VAT-on-tax (Thailand)
				--	7	VAT & VAT_2

Canadian tax system

For both add-on and add-in tax systems.

To program Tax-on-tax system, you must use the tax address “0225”, “0325” or “0425.” To program Donuts tax system, you must use the tax address “0125” or “0225.”

84