Casio TE-2400 <NEW BALANCE, <FOOD STAMP TENDER>, <EBT

<FOOD STAMP TENDER>, <EBT>

		Description		Choice	Program code
	Allowable number of validation printing (“0” means no limitation)			Significant number	:
				(0 ~ 9)	D11
	Force validation operation.			No = 0	:
				Yes = 1	D10
	Disable operation in RF/REG– mode.		a	No = 0
				Yes = 1
					:
	Disable operation in REG2 mode.		b	No = 0
				Yes = 2	(a+b+c)
					D9
	Disable operation in REG1 mode.		c	No = 0
				Yes = 4
	Force batch slip printing.		a	No = 0	:
				Yes = 1
					(a+b)
				No = 0
	Prohibit over tendering. (only for <EBT>)		b		D8
				Yes = 4
	Always “0”				;
					D7
	Print VAT breakdown.		a	No = 0	:
				Yes = 1		3
					(a+b)
	Validation amount			Subtotal = 0		Program
			b		D6
	1 Print subtotal amount	2 Print amount tendered		Tender = 4
	Always “0”				;
					D5
				Maximum value
	High amount limit specification for subtotal and tendering amounts.			(0 ~ 9)	::
				Number of zeros
					D4 D3
				(0 ~ 9)
	Always “00”				;;
					D2 D1
<NEW BALANCE>
		Description		Choice	Program code
	Allowable number of validation printing (“0” means no limitation)			Significant number	:
				(0 ~ 9)	D11
	Force validation operation.		a	No = 0	:
				Yes = 1
	Cancel the transaction if no item is registered.		b	No = 0	(a+b)
					D10
				Yes = 4
	Disable operation in RF/REG– mode.		a	No = 0
				Yes = 1
					:
	Disable operation in REG2 mode.		b	No = 0
				Yes = 2	(a+b+c)
					D9
	Disable operation in REG1 mode.		c	No = 0
				Yes = 4
	Force batch slip printing.		a	No = 0
				Yes = 1
					:
	Open drawer when the key is pressed.		b	No = 0
				Yes = 2	(a+b)
					D8
	No receipt is issued.		c	No = 0
				Yes = 4
	Function after normal (not in check tracking) registration:			Significant	:
	Operation error = 0, Auto Cash = 1, New balance = 2			number	D7
	Print VAT breakdown.		a	No = 0
				Yes = 1	:
	Service charge		b	Amount = 0	(a+b)
					D6
	1 Use an amount	2 Use a rate		Rate = 2
	Always “00000”				;;;;;
					D5 D4 D3 D2 D1

TE-2200/2400 Dealer's Manual 59