Connecting to a USB Device while the Data Projector is On

If you connect a USB device to the Data Projector’s USB port while it is turned on, it will perform one of the following operations (depending on its current plug-and-play setting).

When plug-and-play is enabled:

When this type of

The Data Projector does this automatically:

device is connected:

 

 

 

USB memory device

Starts up Viewer (page 30) and projects the Viewer screen.

 

 

YW-2 Wireless Adapter

Starts up Wireless (page 50) and projects the Wireless screen.

 

 

YC-400 Document

Starts up the YC Camera application (page 96) when the YC-400

Camera

Document Camera is turned on and projects the YC Camera application

 

screen.

 

 

When plug-and-play is disabled:

In this case, the image that is currently being projected does not change. However, Viewer, Wireless, or the YC Camera Application will start up in the background, depending upon the type of USB device that is connected to the Data Projector.

Changing the Input Source while a USB Device is Connected

On the Data Projector’s remote controller, press the [INPUT] key to change the input source. Each time you press the [INPUT] key, the Data Projector will check the RGB terminal, VIDEO terminal, and USB port for an input signal. If it finds a signal, it will select it as the input source automatically and project its contents.

10