Casio XJ-S35 Advanced Wireless LAN Connection Settings, Web Setup

Advanced Wireless LAN Connection Settings

This section explains how to configure advanced settings for a wireless LAN connection between the Data Projector and a computer.

zAll of the operations in this section assume that you have already configured the settings under “Wireless LAN Connection Basics” (page 52).

zFor details about projection operations after establishing a connection, see “Using Wireless LAN for Projection” (page 91).

Web Setup

In order to modify the settings of a Data Projector manual setup profile and to configure advanced settings of other Data Projector settings, you need first to display a special web browser page named “Web Setup” on you computer screen. To display Web Setup, use a web browser running on a computer that is connected to the Data Projector over a wireless LAN.

To display and log into the Web Setup page

1 Use the Simple Connection profile to establish a wireless LAN connection between a computer and the Data Projector.

zSee “Establishing a Wireless LAN Connection with a Single Computer Using a Simple Connection” on page 53 for more information.

zIf a Simple Connection is already established between the first computer and the Data Projector, proceed to step 2.

2	On the Wireless Connection window of the computer, click the		button.
	z This will start up the computer’s default browser and display an initial page like the one
	shown below.
	z The Web Setup page may not appear if your browser is running already. In this case,
	quit the browser and then click the	button again.

65