Wireless LAN Connection Basics

This section explains the basic procedures for configuring settings for a wireless LAN connection between the Data Projector and a computer.

zThis section includes the basics for establishing a wireless LAN connection between the Data Projector and a single computer, or between the Data Projector and multiple computers. For details about increasing security and settings required for connection to a wireless LAN access point, see “Advanced Wireless LAN Connection Settings” (page 65).

zFor details about projection operations after establishing a connection, see “Using Wireless LAN for Projection” (page 91).

Important!

zThe procedure below assumes that the Data Projector’s plug-and-play feature is turned on (which is the initial default setting). If you have turned off plug-and-play, turn it back on before performing the procedure below. For more details about the plug-and- play setting, see “Setup Menu Contents” in the User’s Guide.

zThe operations described here assume that the CASIO YW-2 wireless LAN adapter is connected to the computer. In the case of a computer equipped with another manufacturer’s wireless LAN adapter or a built-in wireless LAN adapter, configure settings in accordance with the user documentation that comes with the adapter you are using.

52