Performing a Presentation Using a Wireless LAN

(Projecting Computer Screen Contents Over a Wireless LAN)

This section explains how to establish a wireless LAN connection between the Data Projector and a computer and project the computer’s screen contents over the wireless LAN.

Supported Wireless LAN Devices

CASIO YW-2S wireless adapters are required in order to establish a wireless LAN connection between a computer and the Data Projector. The YW-2S package includes two YW-2 USB type wireless adapters, one for the Data Projector and one for the computer.

Important!

zNote that use of any other wireless adapter besides the YW-2 is not supported.

zUse of the stickers that come with the YW-2 Wireless LAN adapter is not necessary when you connect a YW-2 to the XJ-S35 Data Projector.

Computer Requirements

In addition to the “Minimum System Requirements” (page 11), the computer must also conform to any one of the following in order to establish a wireless LAN connection with the Data Projector.

a.YW-2 wireless adapter plugged into a USB port

b.Built-in wireless LAN function conforming to IEEE 802.11b standard

c.Add-on wireless LAN function (other than YW-2) conforming to IEEE 802.11b standard All of the explanations in this manual are based on a computer that conforms to “a. YW-2 wireless adapter plugged into a USB port”.

Important!

There is no guarantee that all computers conforming to one of the above conditions will be able to establish a wireless LAN connection with the Data Projector.

48