3To use the Manual Connection profile to establish a wireless LAN connection between the first computer and the Data Projector
Note
Perform the following steps while the connection profile dialog box is on the display at the end of the procedure under “2 To create connection profiles for the computers” (page 56).
1 Use the Simple Connection profile to establish a wireless LAN connection between the first computer and the Data Projector.
zSee “Establishing a Wireless LAN Connection with a Single Computer Using a Simple Connection” on page 53 for more information.
zIf a Simple Connection is already established between the first computer and the Data Projector, proceed to step 2.
2 On the Wireless Connection window of the first computer, select “Switch Connection Profile” on the “Connection” menu.
3
4
zThis will display a dialog box for switching the connection profile.
Click the “Profile Name” down arrow button and then select “Test” from the menu that appears.
Click the [Send Settings] button.
zThis will display a dialog box for sending the setup.
5 Selectbutton.“Manual Connection 1” for “Send Destination”, and then click the [OK]
zThis will display a dialog box prompting you to enter the current password.
zEnter the password that you use when logging in to Web Setup (page 65). The initial default password is “casio”.
6 Enter the password and then click the [OK] button.
58