Press the [MENU] key to display the setup menu.
Configuring Viewer Setup Menu Settings

You can use the Viewer Setup Menu to configure viewer display settings and to perform a presentation using playback settings that are different from those that were stored with presentation data using EZ-Converter.

Note

zWhen you perform a slideshow by running a presentation file created with EZ- Converter, the slideshow settings on the Viewer setup menu (Image Switching, Slideshow Display Interval, Slideshow Transition Effect, and Slideshow Repeat) are changed automatically to the playback settings (page 23) saved in the presentation file you are running.

zIn order to modify slideshow settings for which “Auto” was selected for the presentation file’s “Image Switching” setting when the file was created with EZ- Converter, you need to pause the slideshow, open the menu, and then change the settings as required.

To configure Viewer setup menu settings

1

2 Press the [T] key to move the highlighting to “USB” and then press the [ENTER] key.

3 Press the [T] key once to move the highlighting to “Setup” and then press the [ENTER] key.

zThis will display the Viewer setup menu.

4 Use [T] and [S] to select the menu item whose setting you want to change.

42