Getting Ready
7.On the remote controller, press the [MENU] key to display the setup menu, and then configure the settings below in the indicated sequence.
| Setting Item | Setting |
(1) | Option Settings 1 3 Auto Keystone Correction | Off |
|
|
|
(2) | Screen Settings 3 Keystone Correction | 0 |
|
|
|
(3) | Screen Settings 3 No Signal Screen | Black |
|
|
|
(4) | Input Settings 3 Signal Name Indicator | Off |
|
|
|
(5) | Option Settings 1 3 Auto Power Off | Off |
|
|
|
zIf the Projector System will be used in an inverted ceiling mount configuration, select “On” for the “Screen Settings 3 Ceiling Mount” setting.
zIf the Projector System will be used in a rear projection (projecting from behind the screen) configuration, select “Rear” for the “Screen Settings 3 Projection Mode” setting.
zIf the Projector System will be used in a location at an elevation of 1,500 to 2,000 meters, select “On” for the “Option Settings 2 3 High Altitude” setting.
8.Press the [P] (Power) key twice to turn off Projector A.
9.Unplug the power cord of Projector A from the power outlet and plug in Projector B.
10.Repeat the above steps 2 through 8 on Projector B.
11.Plug the power cord of Projector A into the power outlet.