XJ-SK600 Overview

The XJ-SK600 Projector System uses a Control Box to sync two projectors so their output looks and acts as if it is coming from a single projector. A powerful collection of projected image shaping functions, enables clear image projection not only onto a flat screen, but also onto curved and irregular surfaces.

Important!

zAfter the Projector System has been installed and adjusted, do not alter the cabinet position or positions of the projectors inside the cabinet, the projector zoom ring settings, or the screen position.

Any changes to the above will require re-adjustment of the Projector System.

zWhen installing the Projector System or when adjusting the cabinet, take care to avoid getting your hands pinched under the cabinet or by door in the back of the cabinet.

Unpacking

Before getting into setup of the Projector System, take a few moments to make sure that all of the items listed below are included.

zXJ-SK600 Setup Guide (This manual)

zCabinet*1

zFeet ×4 (for placement on a flat surface)

zControl Box (YA-S10)*1

zProjectors (XJ-M250) ×2*1

zControl Box remote controller (YT-200)

zControl Box AC adapter and power cord

zProjector remote controller (YT-120)

zProjector power cords ×2

zRemote controller batteries (AAA-size, test use) ×4

zHDMI cables ×2

zRS-232C cables ×2

zMini D-Sub Cable

zDATA PROJECTOR CD-ROM (Contains projector User’s Guide)*2

zDATA PROJECTOR Setup Guide

zDATA PROJECTOR “Read this first” Sheet

zWarranty Certificate

*1 The Control Box and two projectors are installed in the cabinet at the factory.

*2 Some XJ-SK600 models do not come with a CD-ROM. If your projector does not come with a CD-ROM, download the User’s Guide from the CASIO projector website. See “User Documentation” (page E-1)for more information.

E-2