MSC-2Dx 14
FEATURES

Auto Time Feature (Auto Start/Stop)

When the Auto Time feature of AT is on, the main unit automatically starts/stops measuring and
recording when ever the wheel is rotating. icon appears on the middle display. When AT
feature is on, buttons will not start or stop any operations. Therefore the AT feature is only useful
when using the unit for cycling.
When you use this unit on your wrist, turn off the Auto Time ( ) feature.
NOTE !: If you turn feature on while using the unit as a wristwatch/heart rate monitor,
the unit stops measuring. Be careful not to press the SET/AT button during
wristwatch/heart rate use.
Switching Auto Time feature On/Off
1. The Auto Time feature can be turned on or off when Elapsed Time TM, Average Speed AVS
or Trip Distance DST is in the lower display.
2. Push SET/AT button to turn on or off the Auto Time feature.
Auto Time feature is turned on when the icon appears or off when the icon is not
visible.

Power Saving Feature

When the main unit is left without any button operation or without receiving any signal of heart
rate or wheel signal for about 15 minutes continuously, the power supply is shut down and the
unit will go into the Sleep State, displaying only the clock (as in the left figure).
However, even in the Sleep State, the unit continues to count Elapsed Time TM.
When any button other than LT button is pressed, or the current signal is received, the screen
wakes up and returns to normal display.
NOTE !: If the unit is left with the readout screen or the setup screen of target heart rate
zone/Lap/Memory Record, the power saving feature might not work. Always
leave your MSC in a main function for long records of time.

Speed Pace Feature

The Pace arrow on the lower display indicates the current speed level, whether it is higher or
lower than the average speed.
------------------------- The current speed is higher than the average speed.
------------------------ The current speed is lower than the average speed.
------------------------- The current speed is equal to the average speed.
No illumination --------The current speed and/or average speed is zero.
The Pace Arrow
SET/AT
Auto time
feature On
Auto time
feature Off