CBM America iDP3240 manual ESC * m n1 n2 d k

ESC * m n1 n2 [ d ] k

[Function]	Specifying the bit image mode
[Code]	<1B>H<2A>H<m><n1><n2> [<d>] k
[Range]	m= 0, 1, 32, 33
	0	n1	255
	0	n2	3
	0	d	255
	k = n1 + 256 ⋅ n2			(m = 0, 1)
	k = (n1+ 256 ⋅ n2) ⋅ 3 (m = 32, 33)
[Outline]	According to the number of dots specified in “n1”, “n2”, specify
	the bit image of mode “m”.

•The number of dots printed is divided by 256, whose quotient is taken as n2 and residual as “n1”.

•The total number of dots printed in the horizontal direction is equal to n1 + (256 ⋅ n2).

•When bit image data have been input in excess of dot positions that can be printed on one line, the excess data are discarded.

•”d” is bit image data. Bits to be printed are specified as “1” and those not as “0”.

•The bit image modes specified by m are shown as follows:

	m		Mode	Vertical Direction		Horizontal Direction
				No. of Dots	Dot Density	Dot Density	Max. No. of Dots
	0		8-dots single density	8	67 DPI	101 DPI	416
	1		8-dots double density	8	67 DPI	203 DPI	832
	32	24-dots single density		24	203 DPI	101 DPI	416
	33	24-dots double density		24	203 DPI	203 DPI	832
[Caution]			• When the value of m is out of the above range, the data
			following after n1 is processed as normal printing data.

•After completion of bit image printing, the printer returns to normal data processing mode.

— 66 —