CBM America iDP3240 manual Esc L

ESC L

[Function]	Selecting PAGE MODE
[Code]	<1B>H<4C>H
[Outline]	Switches from STANDARD MODE to PAGE MODE.
[Caution]	• This command is only effective if it entered at the beginning
	of a line.
	• This command is not effective if it is entered when in PAGE
	MODE.
	• STANDARD MODE is restored when printing specified by FF
	is finished or when ESC S is issued.
	• The character mapping start position will be the point specified
	by ESC T in the print area specified by ESC W.
	• The commands listed below, which have separate settings for
	PAGE MODE and STANDARD MODE, are changed to the
	settings for PAGE MODE use.
	(1)	Spacing setting:	ESC SP
	(2)	Line feed width setting: ESC 2, ESC 3
	• The following commands are valid only in PAGE MODE:
	(1)	ESC V Specifying/canceling 90°-right-turned characters.
	(2)	ESC a Aligning the characters.
	(3)	ESC { Specifying/canceling the inverted characters.
	(4)	GS L Setting the left margin.
	(5)	G3S W Setting the print area width.
	• The following commands become invalid in PAGE MODE:
	(1)	FS p Printing NV bit images
	(2)	FS q Defining NV bit images
	(3)	FS g1 Writing to user NV memory
	(4)	GS V0 Printing raster bit images
	• ESC @ restores STANDARD MODE.
[See Also]	“PAGE MODE” in APPENDIX 1
	FF, CAN, ESC FF, ESC S, ESC T, ESC W, GS $, GS \

— 78 —