— 26 —
No. Function ON OFF Factory setting
1 Auto cutter Available Not available ON
2 Cover open Invalid Valid OFF
3 Easy Loading Invalid Valid OFF
4 Print columns
60 columns 69 columns
OFF
5 CR mode LF Operation Ignored OFF
6 Input buffer 4K bytes 64K bytes OFF
7Print density See the table below ON
8OFF
5.2 Table for Setting DIP Switches

DIP switch 1

Print density (DIP switch 1)

Print density Level 1 Level 2 Level 3 Level 4
No. (Light) (Standard) (Slightly dark) (Dark)
7 OFF ON OFF ON
8 OFF OFF ON ON

Note: If print density is set to level 2 or over, print speed may decrease.