Extron electronic DMP 64 Control Tab, Audio Settings Page, Change the Input Gain and Attenuation

Control Tab

Audio Settings Page

The Audio Settings page provides a way to set the input audio gain and attenuation, output volume, and mix-point adjustments including level control, and mute or unmute. Access the Audio Settings page by clicking the Audio Settings link on the control page (see figure 71).

Figure 71. Video and Audio Settings Page

Change the Input Gain and Attenuation

Users can set the level of audio gain or attenuation (–18 dB to +80 dB) for each input from the audio settings page. Audio levels can be adjusted so there are no noticeable volume differences between sources.

Change an input audio level setting as follows:

1.Next to the desired input number, click the input level drop-down box. A drop-down scroll box appears (right).

2.Click and drag the slider or click the scroll up button or scroll down button until the desired audio level is visible.

Alternately the + and - boxes increment the level up or down one step.

3.Click the desired gain or attenuation value. The range is –18 to +80 dBu.

4.Repeat steps 1 through 3 for each input.

DMP 64 • HTML Operation 132