Extron electronic DMP 64 DSP Configurator Windows Menus, b c d, Keyboard Navigation, •Tab key

DSP Configurator Windows Menus

The DSP Configurator program is fully navigable using the computer keyboard. Some keyboard navigation behavior matches Windows standards, while other behaviors are specific to DSP Configurator.

Keyboard Navigation

When the program starts, the cursor focus defaults to the mic/line input gain block

(figure 56, A). The input 1 gain block is highlighted green [   ]. The <Tab> key toggles to the various sections outlined in red in figure 56.

Within the sections, the <navigation arrows> can be used to move one block right, left, up, or down within these sections.

NOTE: The callout numbers for figure 56 are not the same as figure 17.

a g e f

b

c d

Figure 56. DSP Configurator Program Window

Standard Windows Navigation

The keyboard keys navigate and function as follows:

•Tab key —

Sequentially jump among major segments of the DSP Configurator program. From the audio input chains (A), sequential jumps are in the following order:

BMain mix-points

CVirtual return signal path

DVirtual return mix-points

EOutput signal chain

FMode (toggles to Live, then Emulate)

GPresets (<Down> arrow can select presets)

DMP 64 • Software Control 85