Extron electronic DMP 64 manual Command, ASCII command, Response, Additional description

Command and Response Table for DSP SIS Commands (continued)

Command	ASCII command	Response	Additional description
	(host to device)	(device to host)
Protected configuration

NOTE: The DMP 64 can save and recall a Personal Identification Number (PIN)-protected configuration, including mic mixes, parameters, variables, and values (with the exception of the device’s IP address). The protected configuration is useful to establish the DMP 64 in a known state, either as a troubleshooting tool or as a baseline configuration.

Save the configuration	E S X7) PCFG}	PcfgS]	Save the configuration to the
			protected memory location.
Recall the configuration	E RPCFG}	PcfgR]	Recall the protected
			configuration
Change the PIN	E P X7)old*X7)	PcfgP X7)new]	Overwrite the old PIN
	newPCFG}		(X7)old) with the new one (X7)
			new).
Query configuration saved	E QPCFG}	X7!]
status
NOTES: X7) = Personal Identification Number (PIN)		Four numeric digits, default = 0000
X7! = Protected configuration status		0 = no protected configuration saved

1 = protected configuration saved

Table 1. X6) — Level Control and Mix-point Selection

NOTE: Circled numbers refer to DSP Processors Addressable by

SIS Commands on page 103.

A Input Gain Control	X6)
Mic/Line Input 1	40000
Mic/Line Input 2	40001
Mic/Line Input 3	40002
Mic/Line Input 4	40003
Mic/Line Input 5	40004
Mic/Line Input 6	40005

E Volume Out Control	X6)
Output 1	60000
Output 2	60001
Output 3	60002
Output 4	60003

F Virtual Return Gain	X6)
Output A	50000
Output B	50001
Output C	50002
Output D	50003

B Pre-mixer Gain	X6)
Mic/Line Input 1	40100
Mic/Line Input 2	40101
Mic/Line Input 3	40102
Mic/Line Input 4	40103
Mic/Line Input 5	40104
Mic/Line Input 6	40105

DMP 64 • SIS Programming and Control 107