Extron electronic DMP 64 manual DSP Configurator Toolbar Menus, File, Edit

DSP Configurator Toolbar Menus

The DSP Configurator contains the following structural menus, arranged horizontally below the title bar:

File

NOTE: New, Open, and Recent Files are unavailable in Live mode.

•New — Discards the current DSP configuration (after prompting to save any changes) and opens a blank configuration file.

•Open — Loads and activates a previously saved DSP configuration file.

•Save — Saves all changes to the current DSP configuration file under the current file name. If the file has not previously been saved, prompts for a file name.

•Save As — Saves all changes to the current DSP configuration file under a new file name.

•Backup — Transfers all partial presets plus the current configuration to a DSP configuration file within the DSP Configurator program.

•Recent Files — Opens a list of recently opened or saved DSP configuration files.

•Exit — Closes the DSP Configurator Program.

Edit

•Cut — Removes all parameters of a selected processor block or set of selected blocks to the clipboard. If not followed by a Paste command to a different block, the parameters are restored.

NOTE: Processor blocks are not removed from the processor stream after a Cut and a subsequent Paste operation. Only the parameters are moved.

Processor blocks and their parameters can be pasted only into another block of the same type. For example, the input 1 filter block and all of its parameters can be copied to the input 2 filter block but not to the input 1 delay block.

•Copy — Copies all of the parameters of a selected processor block, gain block, or set of selected blocks to the clipboard.

•Paste — Inserts processor blocks and their parameters from the clipboard into the selected location.

DMP 64 • Software Control 22